Easy and Cool Dragons to Draw

Download Article

Download Article

Dragons are some of the almost well-known mythical creatures, made famous from fairy tales and ancient legends. If you want to design a dragon on your own, beginning pick what type you lot desire to depict. Western dragons look similar to other lizards or dinosaurs with wings and are some of the most normally seen types in art. Eastern (Chinese or Japanese) dragons unremarkably don't take wings and resemble a serpent more than a cadger. With a bit of do and patience, you'll be able to draw whatsoever type of dragon!

Picket our step past stride video here!

1. 1

   Make a large and pocket-sized circle next to one another for the front end and back of the body. Kickoff past making a large circle near the middle of your paper, using a compass if yous desire to go it perfectly circular. Then draw another circumvolve that's most 2-thirds of the size of the showtime ane to the left of it so in that location's a small gap betwixt them. The larger circle will become the chest and shoulders of your dragon and the smaller one will be for the hips.^[one]

   • Don't overlap the circles or else your dragon's body will look too short.
   • Your dragon volition wait longer if yous put the 2nd circle further away from the first 1.
   • Be careful not to draw the circles too large or else the residue of your dragon won't fit on the page.

2. 2

   Draw a smaller circle with a rounded trapezoid to make the dragon'south head. Make a circle that's about ane-third of the size of the front of the body, and identify it above the largest circle so at that place'south a large gap betwixt them. Where you describe the circle volition determine how long your dragon's cervix volition be. Add a small rounded trapezoid to the right side of the circle to requite your dragon a snout.^[ii]

   • Employ a compass to draw the circle if y'all desire it to look perfectly round. Otherwise, it'south okay to describe it freehand.
   • Describe with calorie-free pencil lines so you can erase and reposition the head if you don't like where you lot drew it the first time.

   Advertisement

3. 3

   Sketch curved lines connecting the caput and trunk circles. Start from the lesser of the head and draw a curved line that connects to the far right side of the large circumvolve. Then make another S-shaped line from the top of the head so it intersects the top of the large circle to complete the neck. Add a curved line from the peak of the big circle to the top of the circle on the left. Make the dragon'south stomach with some other curved line that connects the bottom of the large circle to the bottom of the circle on the left.^[3]

   • Avert using direct lines when you connect the circles since it will make the dragon look unnatural.

4. 4

   Put in lines for the legs and so you know what shape to make them. Start near the heart of the largest circle and describe a straight line angled astern so information technology extends by the bottom of the circumvolve. Then add a minor dot to the cease of the line for the ankle articulation before cartoon another straight line angled forward that'south about i-fourth of the length of the start one. Adhere a straight horizontal line for the dragon's foot. Continue adding lines for the legs on the front end and back circles until your dragon has 4 legs.^[4]

   • Some dragons may only take wings instead of front legs. (Those dragons are chosen lindworms or wyverns.) If you don't want your dragon to have front end legs, merely go out them off.

5. 5

   Sketch out rounded tube shapes effectually the lines you drew for the legs to bulk them upwardly. Get-go by drawing a curved line on either side of the leg lines y'all fabricated earlier. Make the legs so they're about the aforementioned thickness as the diameter of the head. Keep the straight guide lines you drew in the center of the curved lines to add muscles to your dragon's legs. Extend the legs downward to the ankle joints you drew at the bottom. Draw three-4 toes on each foot that cease in points to give your dragon some claws.^[5]

   • You can besides draw circles and ovals over your lines instead of tube shapes to make the musculature await more realistic.
   • Look at pictures of other lizards and reptiles to use every bit references for your dragon'southward feet since they may accept similar features.

6. 6

   Add a curved tail coming out from the back of the body. Showtime from the summit of the medium-sized circle where the and draw a curved line going toward the left side of the page. Make the line virtually the aforementioned length every bit the dragon'south trunk earlier ending it. And then draw a 2nd curved line from the bottom of the circumvolve that follows the curves of the first line. Finish the 2d line then it forms a indicate with the first one.^[six]

   • You can draw your dragon's tail as long as yous want it.
   • Make the tail narrower as it gets closer to the tip so information technology looks natural.

7. seven

   Sketch out curved lines for the shape of the dragon's wings. Start the base of operations of the fly at the elevation of the largest circle but behind the dragon'due south neck. Extend a curved line going back from the dragon'due south neck and end the line when it's over the center of the dragon's trunk. Then make another curved line going angled toward the caput and end it before it intersects the cervix. Make a long curved horizontal line that ends higher up the tail to make the top of the wing.^[7]

   • You can add spikes to the top corner of your dragon's wings if y'all want.
   • You can make the wings larger or smaller if you want.

   Tip: The 2d wing volition be hidden behind the one that'southward in front end, and so you don't need to worry about drawing information technology if you don't want to.
   

8. 8

   Add the webbing to the wings to connect them to the body. Start from the tip of the wing that's over the tail and make a wavy line back toward the center of the dragon'southward body. Once the line intersects the dragon's back, draw curved lines from the top corner of the wing so they extend to the wavy line you merely drew to make the webbing.

   • Dragon wings traditionally look similar to those of a bat, so you tin can use pictures of them as references for your drawing.

9. nine

   Requite your dragon features and horns on its head. Start past drawing small circles for the eyes virtually the elevation of the caput. Add together a bumpy brow ridge above the eye to brand your dragon await angry or menacing. Draw a line from the end of the muzzle toward the eye of the circle to add together the mouth, and put a few pointed teeth coming out of the rima oris. Then requite your dragon 2 curved horns coming off the dorsum of its head to requite it more than character.^[eight]

   • Some dragons have ears that resemble their wings. If you desire to add ears, describe them directly below the horns.
   • The educatee in your dragon's eyes can be circular or wait like a slit.

10. 10

    Erase any lines you made that aren't a role of your dragon. Use your eraser to remove whatsoever marks you made that aren't a part of your dragon's torso, such as the circles or lines in the middles of the legs. Work carefully so you don't erase any of the dragon's outline, or else you'll accept to redraw sections. Wipe or blow away any eraser shavings to clean off your paper.^[9]

    • Use the eraser on your pencil or use a clickable thin eraser to clean upwardly lines in tight areas.
    • You tin can get over your dragon's outline with a pen or sparse marker earlier you erase the guide lines to ensure you don't remove any marks by accident. Let the pen or marker dry completely before erasing since it could smear.

11. 11

    Add scales if yous want to make your dragon look realistic. In one case you lot clean up your drawing, add together pocket-size curved or wavy lines within the dragon's trunk to brand a scale texture on its skin. Don't draw every unmarried scale since it could make your drawing await messy. Piece of work lightly in pencil so you can erase the scales if they make your drawing visually confusing or if you desire to suit the size of the scales.^[10]

    • You don't need to give your dragon scales if you lot don't want.
    • You may also add together spikes along your dragons dorsum to add together more texture and detail.

12. 12

    Finished.

    Advertisement

1. 1

   Describe a circumvolve with a curved jaw for your dragon's head. Place a circle near the tiptop left side of your paper, making sure information technology's not likewise large or else the balance of the dragon won't fit on the folio. Connect a pocket-size curved trapezoid shape to the left side of the circle to create a rough outline for dragon's snout.^[11]

   • Use a compass or trace around a circular object if you want to draw the circle perfectly.

2. two

   Brand 2 more circles of the same size below and to the correct of the head. Position the get-go circle below the caput and so there's a small gap between them. This first circle will be where you identify the front pair of legs. Place the second circle to the correct of the circle you just drew then it's the same distance away equally the head'south diameter. Make sure the centre of the right circle lines upwards with the height of the get-go circle you drew this stride.^[12]

   • You don't have to describe perfect circles for the trunk, but you tin apply a compass or round object if you want.
   • Place the 2nd circle further away from the first ane if you lot desire your dragon to have a long body.

3. 3

   Sketch a curved tube to connect the head with the other circles. Start a line at the top of the head and make an S-shaped curve downward toward the top of the beginning circle. Continue curving the line until it intersects with the top edge of the second circle. Repeat the process starting at the bottom of the head and making your curved line to the left side of the get-go circle. Continue extending the line until y'all reach the bottom of the 2nd circle.^[13]

   • Eastern dragons have bodies similar to snakes, so wait at pictures of how a serpent curves its body for references.

4. 4

   Put a curved tube ending in a point coming off of the far correct circle for the tail. Starting time from the top of the far right circle and make another S-shaped curve going toward the right side of the page so it's the same length equally the head to the starting time circle. So make a second line from the bottom of the circle and follow the aforementioned shape as your first line. Taper the stop of the tail until it comes to a indicate at the end. Your dragon volition now look like a long snake.^[14]

   • Yous can brand the tail as long as y'all desire.

5. 5

   Add legs to the bottoms of the curves on the body. Draw a straight tube coming out from the center of the circle at the front of the dragon's trunk that's every bit long equally the circle'south diameter and about one-quarter as thick. Extend the tube down past the bottom of the circumvolve before cartoon a box for the dragons foot. Add 3-4 skinnier tubes that are about one-tertiary the length of the leg onto the sides of the box to make your dragon's claws. Depict the other front leg and the back legs the aforementioned way.^[15]

   • You don't have to draw the dorsum legs on your dragon if you don't want to.
   • Your dragon's anxiety don't need to be apartment on the footing since Eastern dragons are unremarkably fatigued flying.

6. 6

   Draw long pilus effectually the dragon'south head and legs. Eastern dragons have pilus around their faces and the bases of their legs. Draw clumps of hair that end in a point coming out from where the dragon'due south head connects to its neck. And so draw hair in the same mode around where the dragon's legs connect to the body for boosted detail.^[sixteen]

   • You tin make the hair as long or as brusque as yous want.
   • Y'all tin can as well sketch hair running down the middle of the dragon's back if you want.

   Tip: Eastern dragons may also have beards, so include some hair on the bottom of the muzzle if you want to.

7. 7

   Give your dragon facial features. Start by drawing eyebrows on the front of your dragon's caput the same manner you added the pilus. Depict circles underneath the eyebrows for your dragon's eyes and put in circular pupils. Add together a curved line running forth the side of the cage to add the dragon's mouth, and draw a few sharp teeth poking out from it. Then add thin wavy tubes above the mouth coming out near the front of the dragon's cage to give it whiskers.^[17]

   • You may also choose to add knobby antlers coming out from the elevation of your dragon'south head.
   • If you want to requite your dragon ears, add ellipsoidal oval shapes to the sides of its head.

8. 8

   Erase the circles and other guidelines y'all drew to make clean up your drawing. Go through your drawing with an eraser and get rid of whatever lines that aren't a part of your dragon'southward trunk, such equally the circles on the body or caput. Be careful non to erase any of the details you added so you don't have to redraw them. Tip your paper upright to go rid of any eraser shavings when you lot're finished.^[18]

9. 9

   Add curved lines for scales down the length of your dragon's trunk. Make repetitive C-shapes that follow the curves of your dragon's body to add the scales. Depict the scales so they're similar in thickness to your dragon's legs and so it doesn't get visually messy. Proceed working downward the total length of the dragon's body until yous've added all of the scales.^[nineteen]

10. 10

    Finished.

    Advertisement

Add New Question

• Question

  How practice I describe an water ice dragon?

  

  Depict dragon #2, but instead of flames, draw mist with a light shade of greyness and blue. For the residue of the body, colour it with different shades of blueish and greyness spikes.

• Question

  How practice I draw a nightwing from Wings of Fire?

  

  Tokayyoshi

  Community Answer

  Utilise the #2 model and give it night colors like blackness, deep purple, and very dark blue. Add silverish or grey dots under the wings.

• Question

  How do I draw a better looking dragon?

  

  Often information technology is easier to go online and wait at images of dragons for inspiration. If you want your dragon to look "clearer", try drawing with pencil and newspaper, non on a reckoner.

• Question

  Is this a hard flick to describe?

  

  Information technology might be if you wonder most it instead of trying. Cartoon always seems hard at first and it is until y'all have good it sufficiently. Requite it a go, don't worry most the first many attempts not working, as the process of trying is what matters and creates your drawing skills. If you give up before you even outset, y'all'll never learn.

• Question

  How exercise I draw a lightening dragon?

  

  Depict dragon #two with lightning effectually its wings, color information technology bluish, and depict a lightning bolt instead of a flame

• Question

  How long will it take me to get the perfect dragon?

  

  It volition depend on your electric current skills and the amount of time your spend practicing.

• Question

  How should fifty brand my baby dragon?

  

  Eve Wolvington

  Community Answer

  Try making a baby dragon a chip smaller than an developed with proportionally larger eyes, cheeks, and anxiety. It might likewise help to describe very small horns.

• Question

  Is there an easier manner to draw a dragon'due south eye?

  

  Try drawing an oval with points on the sides instead of rounded edges. Inside the oval, draw a vertical line.

• Question

  How practice you describe Toothless from How To Train Your Dragon 1 and two?

  

• Question

  How can I know the difference betwixt guidelines and parts of the dragon?

  

  Guidelines help you to draw the actual dragon. The dragon is much more detailed than the guidelines, which may exist blocked or random shapes that assist you encounter the bodily dragon equally information technology forms simply aren't needed once the drawing is in identify.

Show more answers

Inquire a Question

200 characters left

Include your electronic mail accost to become a message when this question is answered.

Submit

Ad

VideoRead Video Transcript

• The colour of your dragon can determine what environment it lives in or what powers information technology has. For example, a blue dragon may breathe water ice while a ruby dragon would breathe burn.

• Expect at pictures of real animals and utilise them for influences and references when you add features to your dragon.

• Work lightly in pencil so you can erase the marks if you make a mistake.

Thanks for submitting a tip for review!

Advertisement

Things Yous'll Need

• Paper
• Pencil
• Eraser

Nigh This Article

Article Summary 10

"To draw a dragon, first decide whether y'all want to draw a cartoon dragon, which will have lots of simple curved lines, or a realistic dragon, which will take more than complicated angled lines. So, cull whether yous want your dragon to be animate burn down, flying, standing on 2 legs, or posing another way. When y'all're set, sketch the frame of your dragon using bones shapes like circles and squares. After you make the frame, get back in and add details like scales, the optics, and the wings. "

Did this summary help you?

Cheers to all authors for creating a page that has been read 1,265,286 times.

Did this article help you?

kiefferdereturn.blogspot.com

Source: https://www.wikihow.com/Draw-a-Dragon

Share this post